Unofficial Stationeers Wiki Unofficial Stationeers Wiki

Kit (Sleeper)

Recipe
Created With	Fabricator
Cost	10g Iron, 2g Gold, 3g Copper

Sleeper

Operation
Power Usage	100W
Construction
Placed with	Kit (Sleeper)
Placed on	Small Grid
Stage 1
Deconstruction
Deconstructed with	Hand Drill
Item received	Kit (Sleeper)

Description

Once properly setup and maintained, allows for controlled sleep giving a safe place to log off.
No surrounding atmosphere needed to operate, can go in with full suit and open visor to use.

Basic Setup Example

• Build the Filtration, put in oxygen filter so it throws out the rest
• On the output build a Gas Tank Storage or similar.
• And a Pressure Regulator to feed a constant pressure to the sleeper (27-100kpa).
• Passive Vent or similar to eject the co2 from the waste output.

• Wire it up.
• put your suit airtank in the system (will use 4000kpa from it to charge the pipes).
• Then turn on and jump in for a good nights rest.

This design works because the sleeper connector is bidirectional,
and it needs a constant trickle of air flowing to draw out the co2 and clean it up.

Once you build larger systems you might want to feed the air at a proper temperature too,
but fresh spawned characters have 20c oxygen tanks.