Automated Room Light
From Unofficial Stationeers Wiki
Definition
This is an automated light system that uses an occupancy sensor to turn lights on and off in a room.
Disclaimer
The room needs to be closed off by a door/hatch for the logic to work and all the walls have to be put into place with at least one sheet put into them before this will work.
What you will need
- Kit (Sensors) X1
- Kit (Logic I/O) X2
Set Up
- Set up each room with its own Power Controller. **Optional**
- While holding the Kit (Sensors), scroll till you can place Occupancy Sensor.
- While holding the Kit (Logic I/O), scroll till you can place a Logic Reader.
- While holding the Kit (Logic I/O), scroll till you can place a Batch Writer.
- Connect all Cable Coils to all the ports on each of the logic, sensor, and light.
