Powered Chutes

2023-10-13T13:27:19Z

69.157.171.77: Parameters for the Chute Bin added.

{{Itembox
| image = [[File:ItemKitPoweredChute.png]]
| name = Kit (Powered Chutes)
| createdwith = [[Autolathe]], [[Fabricator]], [[Hydraulic Pipe Bender]]
| cost = 1g [[Iron]]*
| stacks = 10
}}
{{Structurebox
| name = Chute
| placed_with_item = [[Kit (Powered Chutes)]]
| placed_on_grid = Small Grid
| decon_with_tool1 = [[Wrench]]
| item_rec1 = [[Kit (Powered Chutes)]]
}}

= Chute =

== Description ==
Used to transport items. The Kit can be used to create 5 different variants, all of which require power and can connect to data ports.

* Chute Digital Valve Right: Allows a certain number of items through, then closes until reopened either manually or via data network.
* Chute Digital Valve Left: Allows a certain number of items through, then closes until reopened either manually or via data network.
* Chute Digital Flip Flop Splitter Right: Splits items between two directions. Ratio can be configured.
* Chute Digital Flip Flop Splitter Left: Splits items between two directions. Ratio can be configured.
* Chute Bin: Acts as a manual entry point to the Chute network. Can hold one item, and will not insert the item into the network until the lever on the side is pulled.

== Recipes ==
{{Recipe
|{{Recipe/row |machine = Autolathe |mats = 3g [[Iron]], 3g [[Electrum]], 2g [[Constantan]] |time = 5 |energy = 500}}
|{{Recipe/row |machine = Hydraulic Pipe Bender |mats = 3g [[Iron]], 3g [[Electrum]], 2g [[Constantan]] |time = 5 |energy = 500}}
|{{Recipe/row |machine = Recycler |mats = 1.5g [[Iron]], 1.5g [[Electrum]], 1g [[Constantan]] |time = 5 |energy = 1000}}
}}

= Chute Bin =

{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| On|| Boolean || Turns the Chute Bin on, when set to 1. Turns it off, when set to 0.
|-
| Lock || Boolean ||
|-
| Error || Integer? || Gets the current error of the bin
|-
| Power || Integer || The current power usage of the bin
|-
| RequiredPower || Integer || The required power usage of the bin
|-
| PrefabHash || Integer || The hash of the item in the bin
|}

Pressure Regulator

2023-09-15T17:53:52Z

69.157.171.77: Added two new pressure kits from the Airflow Update

[[Category:Atmospherics]]
{{Itembox
| name = Pressure Regulator
| prefab_hash = 209854039
| image = [[File:{{#setmainimage:ItemKitRegulator.png}}]]
| stacks = Yes, 5x
| createdwith = [[Hydraulic Pipe Bender]], [[Fabricator]]
| cost = 5g [[Iron Ingot|Iron]], 1g [[Gold Ingot|Gold]], 2g [[Copper Ingot|Copper]]
}}
=Construction Kit (Pressure Regulator)=
== Description ==
[[Pressure Regulator]] is used throughout [[Atmospherics]] networks to manage [[Pressure]]. Pressure Regulators comes in two variants: Standard and back-pressure regulators. They can be used to regulate the pressure between two pipe networks.

The maximum pressure that can be set is 20265 kPa, which is double the maximum pressure for most gas-related elements like [[Canister]]s.

Pressure regulator needs power to operate (100 W).

== Use ==
Use left-click while in active hands to place.
Scroll to change to other variants.

=Pressure Regulator=
==Description==
The standard Pressure Regulator will pass through gases, in one direction, while the pressure on its output side is below the set value. It combines several functions:
* Passive check valve: Gas is never allowed to pass "the wrong way", from output to input, even if the Regulator is switched off or unpowered.
* Switched valve: Gas will not pass at all if the Regulator is switched off or unpowered. This is a similar function to the [[Pipe Digital Valve]].
* Regulator: Gas will only pass when the pressure at the output is below the Regulator's setting.
* Compressor: While active, the Regulator will move ''all'' available gas from input to output, up to the set pressure. (Contrast with, for example, a [[Pipe Valve]] which simply equalizes pressure and then stops.)

To calculate the moles per tick, use the following equation:
n = (P * V) / (R * T)

Where:
* P = Min(Input pressure, 101.325)
* V = (OutputPipeVolume / InputPipeVolume) * 100
* n = Moles per tick
* R = Gas constant (8.3144)
* T = Input temperature

{{Data Network Header}}

{{Data Parameters}}
{| class="wikitable"
|-
! Parameter Name !! Data Type !! Description
|-
| Lock || Boolean ||
|-
| Setting || float ||
|-
| On || Boolean ||
|}

{{Data Outputs}}
{| class="wikitable"
|-
! Output Name !! Data Type !! Description
|-
| Power || Boolean ||
|-
| Error || Boolean ||
|-
| Lock || Boolean ||
|-
| Setting || float || Contains the current threshold set on the regulator, in kPa
|-
| Maximum || float || Value of 20265kPa
|-
| Ratio || Float || The ratio between the Setting and the Maximum. As in Ratio = Setting / 20265
|-
| On || Boolean ||
|-
| Requiredpower || Integer || In Watts. The Pressure Regulator require 100W of power to function
|-
|}

=Back Pressure Regulator=
==Description==
The Back Pressure Regulator variant will only pass through gases when the pressure on its intake side exceeds the set value. In other words, the standard Regulator defaults '''open''' and closes when the ''output'' is overpressured, while the Back Pressure Regulator defaults '''closed''' and opens when the ''input'' is overpressured.

Like the standard Regulator, the Back Pressure Regulator also acts as a check valve, switched valve, and compressor (i.e., input gas will move even if the output is already a higher pressure).

Its low flow rate makes it not suitable for being used as an emergency dump valve.

To calculate the moles per tick, use the following equation:
n = (P * V) / (R * T)

Where:
* P = Min(Input pressure, 101.325)
* V = 100
* n = Moles per tick
* R = Gas constant (8.3144)
* T = Input temperature

{{Data Network Header}}

Back Pressure Regulator has exactly the same Network properties as the Pressure Regulator.

=Pressurant Valve=
==Description==
(To be spaded)

=Purge Valve=
==Description==
(To be spaded)

Unofficial Stationeers Wiki - User contributions [en]

Powered Chutes

Pressure Regulator